Lenz Law

A jet plane is travelling towards wets at a speed of $1800 \mathrm{km} {\mathrm{h}}^{-1}$. What is the voltage difference developed between the ends of the wing having a span of $25 \mathrm{m}$, if the Earth’s magnetic field at the location has a magnitude of  $5\times {10}^{-4} \mathrm{T}$ and the dip angle is $30°$ ?

Figure shows a rectangular conductor $PQRS$ in which the conductor $PQ$ is free to move in a uniform magnetic field $B$ perpendicular to the plane of the paper. The field extends from $x=0$ to $x=b$ and is zero for $x>b$. Assume that only the arm $PQ$ possesses resistance $r$. When the arm $PQ$ is pulled outward from $x=0$ with constant speed $v$, the joules heating loss from $b\le x<2b$ would be:

The figure given below shows an arrangement by which current flows through the bulb (X) connected with coil B, when a.c. is passed through coil A.


(i) Name the phenomenon involved.

(ii) If a copper sheet is inserted in the gap between the coils, explain how the brightness of the bulb would change.

A conducting rod of length rotates with a uniform angular velocity $\omega$ about its perpendicular bisector. A uniform magnetic field $B$ exists parallel to the axis of rotation. The potential difference between the two ends of the rod

An emf of $0.08 \mathrm{V}$ is induced in a metal rod of length $10 \mathrm{cm}$ held normal to a uniform magnetic field of $0.4 \mathrm{T}$, when move with a velocity of:

Direction of magnetic field is inside the plane of the paper as shown in the figure. A moving rod of length $10 \mathrm{cm}$ has induced EMF of $0.08 \mathrm{V}$. Find the velocity of the rod.

(Given $B=0.4 \mathrm{T}$)

Two identical coaxial coils P and Q carrying equal amount of current in the same direction are brought nearer. The current in
 

The variation of emf with time is best represented by: [considering clockwise sense to be positive]

A random shaped conducting wire is moved in a uniform magnetic field as shown. Find motional emf induced across its end at this instant for which its coordinates are mentioned? [$v$ is along $x$-axis]

​​​​​​​

A metallic rod of $1 \mathrm{m}$ length is rotated with a frequency of $50$ revolution per second, with one end hinged at the centre and the other end at the circumference of a circular metallic ring of radius $1 \mathrm{m}$ about an axis passing through the centre and perpendicular to the plane of the ring. A constant uniform magnetic field of $1 \mathrm{T}$ parallel to the axis is present everywhere. The emf between the centre and the metallic ring is

If given arrangement is moving towards left with speed $v$, then potential difference between $B$ and $D$ and current in the loop are respectively

​​​​​​​

For the conductor $PQ$, at the instant shown, find $V_P-V_Q$.

​​​​​​​

The spokes of a wheel are made of metal and their lengths are of one metre. On rotating the wheel about its own axis in a uniform magnetic field of $5\times {10}^{-5}$ tesla normal to the plane of wheel, a potential difference of $3.14\mathrm{mV}$ is generated between the rim and the axis. The rotational velocity of the wheel is

A conducting rod of length $l$ is hinged at point $O$. It is free to rotate in vertical plane. There exists a uniform magnetic field $\overrightarrow{B}$ in horizontal direction. The rod is released from position shown in the figure. When rod makes an angle $\theta$ from released position then potential difference between two ends of the rod is proportional to:

A conductor is bent in $L$-shape and another conductor is sliding with constant velocity $v$ directed perpendicular to its length as shown in the figure. The sliding conductor always makes equal angle with the two arms of the bent conductor. If resistance per unit length of each conductor is $r$ then current in the loop formed by conductors is,

Out of the following given loops in which loop, the direction of induced current is from $a\to c\to b$

What is motional emf? State any two factors on which it depends.

State Fleming's right-hand rule.

Motional emf is directly proportional to the magnetic field.

What do you mean by motional emf?